STANDARD INTERIOR DOOR INSTALLATION INSTRUCTIONS
SETUP
1. Clean the door area with a non-abrasive cleaner and let it dry fully.
2. Remove the backing from the vinyl layer.
SIDE 1
3.Position Side 1 with the handle or knob "rose" centered in the circle cutout.
4. Align the inner corner V’s with the door edge; lightly press the corners to hold. Starting near the handle, press outward firmly to smooth wrinkles and bubbles.
EDGE
5.Wrap the DoorEdge Defender around the door edge, pinching the corner as you press along the edge for better adhesion.
SIDE 2
6.Adhere the top and the bottom sections of side 2 with these two steps:
a. Pull the top of side 2 tightly around the back and firmly smooth outward to remove any wrinkles and bubbles.
b. Repeat the process 6a for the bottom of side 2.
FOLLOW UP
Over the next 24 hours, pinch the corners and firmly press outward from the center to the edges to remove any bubbles and ensure the DoorEdge Defender is adhered well.
CONGRATULATIONS - YOUR DOOR IS NOW PROTECTED!
PATENT PENDING: Provisional Patent filed with the USPTO.
DISCLAIMER: The product features a strong adhesive designed to securely adhere to the door surface, even around 90-degree bends, ensuring comprehensive protection of all high-touch areas. Please note that we are not responsible for any damage that may occur if the DoorEdge Defender is removed after installation. By installing or removing the product, you acknowledge that any resulting damage is solely your responsibility.